TLC5928PWPG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 3.611W |
| Nominal Supply Current | 40μA |
| Power Dissipation | 3.611W |
| Current - Output | 35mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5928PWPG4 Overview
To save board space, it uses the HTSSOP EP package. Based on the frequency of 35MHz, it operates on the basis of a pulse.It operates with 24 terminations.It has a base of 24 pins.There are 16 segments in it.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.In this device, the output voltage is 17V volts.There are 24 pins on it.Additionally, it is categorized into Display Drivers according to its characteristics.As its minimal input voltage, it operates at 3V.To meet highest efficiency standards, it works on a supply voltage of 3V.There is 5.5V maximum value for supply current.Temperatures should not exceed 85°C in order to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.In this part, LED DISPLAY DRIVER refers to the interface IC.The output current should remain at 35mA.
TLC5928PWPG4 Features
Available in the HTSSOP EP package
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928PWPG4 Applications
There are a lot of Texas Instruments TLC5928PWPG4 LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- High-end retail lighting
- General lighting
- Portable lighting
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- Architectural lighting
- Panel lighting
- Industrial LED Lighting: Image Recognition Devices
