TLC5940PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5940 |
| Pin Count | 28 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Output Current | 120mA |
| Max Supply Current | 6mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5940PWP Overview
As a result of its 28-PowerTSSOP (0.173, 4.40mm Width) package, it helps to save board space on the board. Surface Mount is used to mount the led driver.When it emerges as a Linear, it performs extremely well and is highly reliable.It is capable of operating at a temperature of -40°C~85°C TA. There are considerable benefits for Backlight.For its operation, 28 terminations are designed.The LED light driver has a base configuration of 28 pins.The number of segments is 16.TLC5940 is the base part number for the LED driver.Ideally, the supply voltage should be 5.5V.It has a voltage output of 17V.There are 28 pins on it.In addition, it can be classified as Display Drivers according to its characteristics.At a voltage of 3V, it operates at a minimal input voltage.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 3V.In the case of supply current, there is a maximum value of 5.5V.Whenever the supply current is lower than 6mA, it can provide high efficiency.120mA is the maximum amount of current that can be supplied to the load.When the switching frequency is maintained at 30MHz, this electronic component is able to fully play its functions.
TLC5940PWP Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 30MHz
TLC5940PWP Applications
There are a lot of Texas Instruments TLC5940PWP LED Driver ICs applications.
- Refrigeration lighting
- Auxiliary lights for on-vehicle cameras
- Portable lighting
- Stage and Studio lighting
- General lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Replacement lamps
- Stage Lighting and Signage
- LED Lightings for Industrial Equipment
- Street lighting
