TLC5941NTG4
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 30MHz |
| Pin Count | 28 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 5.08mm |
| Length | 35.69mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 28 |
| Weight | 2.063789g |
| JESD-609 Code | e4 |
TLC5941NTG4 Overview
Using its PDIP package, it is possible to save board space. Based on the frequency of 30MHz, it operates on the basis of a pulse.For its operation, terminations with a value of 0 are used.To form its configuration, 28 pins are used.The number of segments is estimated to be 16.The voltage of 5.5V is acceptable.17V is the output voltage.In this device, there are 28 pins.Furthermore, it can be classified as Display Drivers based on its characteristics.With 3V as the minimal input voltage, it operates.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.5.5V is the maximum value of supply current that can be used.An operating temperature above 85°C should ensure stable operation.The operating temperature should be higher than -40°C so as to realize stable operation.The interface IC for this part is marked with the LED DISPLAY DRIVER.
TLC5941NTG4 Features
Available in the PDIP package
Frequency of 30MHz
Supply voltage of 5V
TLC5941NTG4 Applications
There are a lot of Texas Instruments TLC5941NTG4 LED Driver ICs applications.
- Scanners and Handy Terminals
- Street lighting
- Down lighting
- Dimmable LED for vehicle interiors
- Portable lighting
- Medical surgery lighting
- Gallery lighting
- Panel lighting
- General lighting
- Sports Facility Lighting
