TLC5943RHBTG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 30MHz |
| Pin Count | 32 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 3.482W |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.482W |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 5mA |
| Number of Segments | 16 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Package / Case | VQFN EP |
TLC5943RHBTG4 Overview
Its VQFN EP package is used to save board space. The frequency of 30MHz is used as the basis for its operation.In this case, there are 32 terminations.In this LED driver, the base is configured as 32.16 segments exist.It is acceptable for the supply voltage to be 5.5V.This device produces a voltage of 17V volts.32 pins are used on the device.Furthermore, it can be classified as Display Drivers based on its characteristics.At its minimal input voltage, it operates at 3V.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.It is possible to supply current up to 5.5V.It is important that the operating temperature not exceed 85°C in order to ensure stable operation.Operating temperatures should be above -40°C to ensure stable operation.This part is equipped with an interface IC marked with LED DISPLAY DRIVER.
TLC5943RHBTG4 Features
Available in the VQFN EP package
Frequency of 30MHz
Supply voltage of 5V
TLC5943RHBTG4 Applications
There are a lot of Texas Instruments TLC5943RHBTG4 LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- Gallery lighting
- A- lamps
- Constant Voltage Power Source for portable equipment
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- Street lighting
- LED Lighting PFCs, Linear Dimmable
- Amusement Machines
- General lighting
