TLE8108EMXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLE8108 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 400mA |
| Interface | SPI |
| Output Configuration | Low Side |
| Output Current | 500mA |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 50V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Max Dual Supply Voltage | 50V |
| Min Dual Supply Voltage | 41V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 50 μs |
| Rds On (Typ) | 800m Ω |
| Turn Off Time | 50 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE8108EMXUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).In the 24-LSSOP (0.154, 3.90mm Width) Exposed Pad package, it is included.It has been mounted as Surface Mount on the LED driver.A Relay, Solenoid Driver switch type is owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.There is a maximum output voltage of N-Channel volts on this LED driver.The TLE8108 family consists of this type.It contains 24 terminations.During operation, the 24 pins are used.It contains 1 functions.The maximum output current must drop to 400mA to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way of this LED driving board.In total, it has 24 pins.The output current is set to 500mA in this case.
TLE8108EMXUMA1 Features
Supplied from 5V
TLE8108EMXUMA1 Applications
There are a lot of Infineon Technologies TLE8108EMXUMA1 Power Switches ICs applications.
- Low Voltage I/O System Power
- Solid-State Drives
- Portable/Handheld Devices
- USB Ports/Hubs
- Mobile Communication Devices
- Telecom and Network Systems
- PC Cards
- Portable Devices
- Portable GPS
- USB Power Distribution
