TMS320C25FNLR
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Memory Size | 8kB |
| RAM Size | 1.1kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 185mA |
| Bit Size | 16 |
| Frequency (Max) | 40MHz |
| Data Bus Width | 16b |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 544 |
| Number of Serial I/Os | 1 |
| Number of Timers | 1 |
| ROM Programmability | MROM |
| Number of External Interrupts | 3 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Height | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 68 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | PID CONTROL; 256 WORDS DATA/PROG RAM |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 68 |
TMS320C25FNLR Overview
Basically, it is a type of electronic component that is available in a PLCC package.For its use, it has 68 terminations.It works with a voltage of 5V as a supply voltage.Pins are present on the 68 component.The configuration of the device includes 68 pins.In order for the device to operate at 40MHz frequency, there is a specific design.Using Surface Mount as a mounting method, it is mounted.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.In this device, the minimum voltage is 4.75V.A maximum voltage of 5.25V can be provided to this device.The device operates on a voltage of 5V as its supply voltage.It can store 8kB data in its memory.A 5V electric power source is used to power it.A further set of features can be provided by this electronic part for PID CONTROL; 256 WORDS DATA/PROG RAM as well.A DIGITAL SIGNAL PROCESSOR, OTHER-type uPs/UCS/Peripheral ICs is used in this system.70°C should be lower than the operating temperature.Temperatures should exceed 0°C during operation.In industrial settings, 1 timers provide accurate feedback and event activation.Interrupts caused by an external source cause 3 interrupts.Its frequency should not exceed 40MHz.Serial 1 I/Os are used to communicate data between devices.
TMS320C25FNLR Features
Supplied in the PLCC package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
3 external interrupts
TMS320C25FNLR Applications
There are a lot of Texas Instruments TMS320C25FNLR DSP applications.
- Tomography technology
- Processing system
- Biometrics
- Automobiles
- Airplanes
- Automobile electronic gadgets
- Computers and laptop
- Instrument modeling
- Infinite impulse response filters
- Boats
