TMS320C30GEL40
| Parameters | |
|---|---|
| Data Bus Width | 32b |
| Address Bus Width | 24 |
| On Chip Program ROM Width | 32 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Input Capacitance | 15pF |
| Integrated Cache | NO |
| RAM (words) | 2000 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 2 |
| Number of Timers | 2 |
| ROM Programmability | MROM |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 32 |
| Non-Volatile Memory | ROM (16kB) |
| On Chip Data RAM | 8.25kB |
| Number of DMA Channels | 1 |
| Height Seated (Max) | 6.22mm |
| Length | 39mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 181-BCPGA Exposed Pad |
| Number of Pins | 181 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | TMS320C3x |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 181 |
| ECCN Code | 3A991.A.2 |
| Type | Floating Point |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 40MHz |
| Base Part Number | 320C30 |
| Pin Count | 181 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Memory Size | 16kB |
| Number of I/O | 16 |
| RAM Size | 8kB |
| Number of Bits | 32 |
| Supply Current-Max | 600mA |
| Bit Size | 32 |
TMS320C30GEL40 Overview
The 181-BCPGA Exposed Pad package contains these electronic components.Tray packaging is provided for it.As a member of Floating Point, it is ideally suitable for a wide range of applications.In order to mount it, it must be in the direction of Through Hole.If it is operating at the temperature of 0°C~85°C TC, then it will be operating normally.As the name implies, the analog voltage range of 5.00V refers to the voltage that can be inserted or removed.There are several digital signal processors in the TMS320C3x series, including this one.The terminations for its uses are 181.Using 5V as the supply voltage, it operates.Pins are present on the 181 component.In its configuration, it contains 181 pins.The base part number 320C30 allows identification of a wide range of related parts.A specific design is present for the device in order for it to operate at the frequency of 40MHz.A Surface Mount, Through Hole mounting method is used for its mounting.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.The minimum voltage supplied to this device is as low as 4.75V.The maximum voltage for this device is 5.25V.It operates with the supply voltage of 5V.Its memory can be used to store 16kB data.Electricity is supplied by 5V.16 I/Os are present on the device.In industrial environments, 2 timers are programmed to provide accurate feedback.External sources cause 4 interrupts.This device stores 32 information.The CPU is not overloaded by data transfer via 1 DMA channels.A 2 serial I/O communicates data between two devices.
TMS320C30GEL40 Features
Supplied in the 181-BCPGA Exposed Pad package
Operating supply voltage of 5V
16 I/Os
4 external interrupts
TMS320C30GEL40 Applications
There are a lot of Texas Instruments TMS320C30GEL40 DSP applications.
- Telephone conversations
- MP3 audio player
- Spectral density estimation
- Instrument modeling
- Processing system
- Automobiles
- Radio detection and rangin systems
- Image signal processing
- Remote sensing image processing technology
- 3D tomography and imaging processing
