TMS320C32PCM60
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-BQFP |
| Number of Pins | 144 |
| Weight | 5.482996g |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | TMS320C3x |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 144 |
| Type | Floating Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 60MHz |
| Base Part Number | 320C32 |
| Pin Count | 144 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 42 |
| Nominal Supply Current | 225mA |
| RAM Size | 2kB |
| Memory Type | RAM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 32 |
| Non-Volatile Memory | External |
| On Chip Data RAM | 2.25kB |
| Number of DMA Channels | 2 |
| Height | 4.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TMS320C32PCM60 Overview
Basically, it is a type of electronic component that is available in a 144-BQFP package.It is provided with a packaging way of Tray.Due to its membership in Floating Point, it is ideally suited for a wide range of uses.Surface Mount is mounted in a manner that allows it to be moved.It is recommended that the device operate at a temperature of 0°C~85°C TC to ensure its normal operation.In analog circuits, the analog voltage range 5.00V represents the voltage range that is available for input or output.It is a part of the TMS320C3x series of digital signal processors.The use of it is terminated by 144.A voltage of 5V is used as the supply voltage.Pins are available on the 144 component.This configuration contains 144 pins.The base part number 320C32 allows identification of a wide range of related parts.It is specifically designed to operate with the frequency of 60MHz.Using Surface Mount as a mounting method, it is mounted.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.It is possible to supply as low a voltage as 4.75V to this device.The maximum voltage for this device is 5.25V.It operates with the supply voltage of 5V.The electric power supply is 5V.To measure time and count events externally, 2 timers/counters are used.42 I/Os are included with the device.The memory type it uses is RAM.An external source causes 4 interrupts.The CPU is not overloaded by data transfer via 2 DMA channels.Using serial 1 I/Os, devices can communicate.
TMS320C32PCM60 Features
Supplied in the 144-BQFP package
Operating supply voltage of 5V
2 timers/counters
42 I/Os
4 external interrupts
TMS320C32PCM60 Applications
There are a lot of Texas Instruments TMS320C32PCM60 DSP applications.
- Vehicle electronics
- Streaming music
- 3D tomography and imaging processing
- Automobile electronic gadgets
- MP3 audio player
- Image signal processing
- Processing system
- Digital communications
- Audio compression
- Infinite impulse response filters
