TMS320C6711DZDP250
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 272-BBGA |
| Number of Pins | 272 |
| Weight | 3.064895g |
| Operating Temperature | 0°C~90°C TC |
| Packaging | Tray |
| Series | TMS320C67x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 272 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.4V |
| Frequency | 250MHz |
| Base Part Number | 320C6711 |
| Pin Count | 272 |
| Operating Supply Voltage | 3.3V |
| Interface | Host Interface, McBSP |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.33V |
| Memory Size | 64kB |
| RAM Size | 512kB |
| Memory Type | EPROM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | TMS320 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 3.30V |
| Number of Timers | 2 |
| ROM Programmability | FLASH |
| Number of External Interrupts | 4 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.26V |
| On Chip Data RAM | 72kB |
| Number of SPI Channels | 2 |
| Height | 2.57mm |
| Length | 27mm |
| Width | 27mm |
| Thickness | 1.78mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320C6711DZDP250 Overview
The 272-BBGA package contains these electronic components.Tray is the packaging method provided.Its Floating Point status makes it ideal for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.By operating the device at the temperature of 0°C~90°C TC, a normal operation is ensured.The digital voltage range of 3.30V refers to the voltage that can be input or output.The TMS320C67x series contains this digital signal processor.There are 272 terminations for its uses.It is supplied with voltage by 1.4V.Pins are located on the 272 component.In its configuration, it contains 272 pins.The base part number 320C6711 allows identification of a wide range of related parts.Specifically, the device is designed to operate at a frequency of 250MHz.As a mounting method, it uses Surface Mount.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.In order to power this device, a voltage as low as 1.33V needs to be supplied.This device can handle a maximum voltage of 3.47V.A voltage of 3.3V is used as the supply voltage.In its memory, this device can store 64kB data.A further set of features can be provided by this electronic part for ALSO REQUIRES 3.3V SUPPLY as well.TMS320-architecture is used in this processor core.It adopts EPROM as its memory type.There are 2 timers programmed to provide accurate feedback and event activation in industrial environments.Interrupts caused by an external source cause 4 interrupts.Short-range communication is achieved using 2 SPI channels in this embedded system.
TMS320C6711DZDP250 Features
Supplied in the 272-BBGA package
Operating supply voltage of 3.3V
4 external interrupts
TMS320C6711DZDP250 Applications
There are a lot of Texas Instruments TMS320C6711DZDP250 DSP applications.
- Sonar
- Digital image processing, data compression
- Image compression
- Fourier transform
- Airplanes
- Biomedical treatment
- Digital hardware
- Control systems
- Computers and laptop
- Audio signal
