banner_page

TMS320C6713GDP225

1.27mm 1.253.3V CPLD 272 Pin 720MHz 1.26V BGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TMS320C6713GDP225
  • Package: BGA
  • Datasheet: -
  • Stock: 169
  • Description: 1.27mm 1.253.3V CPLD 272 Pin 720MHz 1.26V BGA (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case BGA
Number of Pins 272
Packaging Bulk
Pbfree Code no
Number of Terminations 272
ECCN Code 3A001.A.3
Max Operating Temperature 90°C
Min Operating Temperature 0°C
Additional Feature ALSO REQUIRES 3.3V SUPPLY
HTS Code 8542.31.00.01
Subcategory Digital Signal Processors
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Supply Voltage 1.26V
Terminal Pitch 1.27mm
Frequency 720MHz
Pin Count 272
Power Supplies 1.253.3V
Interface PCI
Max Supply Voltage 3.47V
Min Supply Voltage 1.14V
uPs/uCs/Peripheral ICs Type DIGITAL SIGNAL PROCESSOR, OTHER
Bit Size 32
Frequency (Max) 225MHz
Data Bus Width 32b
Address Bus Width 22
Boundary Scan YES
Low Power Mode YES
Format FLOATING POINT
RAM (words) 65536
Barrel Shifter NO
Internal Bus Architecture MULTIPLE
Height Seated (Max) 2.57mm
Length 27mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

TMS320C6713GDP225 Overview


This is an electronic component with a BGA package.A packaging way of Bulk is provided.The terminations for its uses are 272.The supply voltage is 1.26V.There are pins on the 272 component.In its configuration, there are 272 pins.720MHz is a frequency at which the device operates according to a specific design.The mounting method of the device is Surface Mount.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.In order to power this device, a voltage as low as 1.14V needs to be supplied.This device can handle a maximum voltage of 3.47V.Electricity is supplied by 1.253.3V.A further set of features can be provided by this electronic part for ALSO REQUIRES 3.3V SUPPLY as well.A DIGITAL SIGNAL PROCESSOR, OTHER-type uPs/UCS/Peripheral ICs is used in this system.It is recommended that the operating temperature be lower than 90°C.Over 0°C, the operating temperature should be maintained.Its maximum frequency should be kept below 225MHz.

TMS320C6713GDP225 Features


Supplied in the BGA package
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics

TMS320C6713GDP225 Applications


There are a lot of Texas Instruments TMS320C6713GDP225 DSP applications.

  • Streaming music
  • Radio detection and rangin systems
  • Sonar
  • Control systems
  • Dam design
  • Vibration signal processing
  • Audio synthesis
  • Digital communications
  • Electronic information engineering
  • Fourier transform

Write a review

Note: HTML is not translated!
    Bad           Good