TMS320DM642AGDK7
| Parameters | |
|---|---|
| Interface | Host Interface, I2C, McASP, McBSP, PCI |
| Max Supply Voltage | 3.46V |
| Min Supply Voltage | 1.36V |
| Number of I/O | 16 |
| Memory Type | SDRAM, SRAM |
| Number of Bits | 64 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of Timers | 3 |
| Number of External Interrupts | 4 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.40V |
| On Chip Data RAM | 160kB |
| Number of DMA Channels | 64 |
| Height | 2.8mm |
| Length | 23mm |
| Width | 23mm |
| Thickness | 1.8mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 548-BFBGA, FCCSPBGA |
| Number of Pins | 548 |
| Weight | 2.44611g |
| Operating Temperature | 0°C~90°C TC |
| Packaging | Tray |
| Series | TMS320DM64x, DaVinci™ |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 548 |
| ECCN Code | 3A991.A.2 |
| Type | Fixed Point |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.8mm |
| Frequency | 720MHz |
| Base Part Number | 320DM642 |
| Pin Count | 548 |
| Operating Supply Voltage | 1.4V |
| Power Supplies | 1.43.3V |
TMS320DM642AGDK7 Overview
It is a type of electronic component available in package 548-BFBGA, FCCSPBGA.There is a packaging method of Tray provided with it.The fact that it belongs to the Fixed Point family means that it can be applied to a wide range of applications.The device is attached in a way that faces Surface Mount.Keeping the device at the temperature of 0°C~90°C TC will ensure that it runs as it should.In analog circuits, the analog voltage range 3.30V represents the voltage range that is available for input or output.Digital signal processors such as this one are included in the TMS320DM64x, DaVinci? series.The 548 terminations are used for its uses.This device is powered by 1.4V's supply voltage.The 548 component has pins.In its configuration, it contains 548 pins.Based on its base part number of 320DM642, many ralated parts can be found.To operate at 720MHz frequency, the device has a specific design.Mounting is accomplished using Surface Mount.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.1.36V is the minimum voltage that can be supplied to this device.This device can handle a maximum voltage of 3.46V.In order for it to operate, 1.4V is the supply voltage.It receives electricity from 1.43.3V.This electronic part can provide more features for ALSO REQUIRES 3.3V SUPPLY.The device is equipped with 16 I/Os.It adopts SDRAM, SRAM as its memory type.3 timers are used in industrial environments to provide accurate feedback and event activation.There are 4 interrupts caused by an external source.The device stores 64 pieces of information.For data transfer, 64 DMA channels are available without overloading the CPU.
TMS320DM642AGDK7 Features
Supplied in the 548-BFBGA, FCCSPBGA package
Operating supply voltage of 1.4V
16 I/Os
4 external interrupts
TMS320DM642AGDK7 Applications
There are a lot of Texas Instruments TMS320DM642AGDK7 DSP applications.
- Speech processing
- Spectral density estimation
- Control systems
- Real-time effects
- Fourier transform
- Compression of videos
- Signal processing for telecommunications
- Digital hardware
- Tomography technology
- Receivers
