TMS320DM6435ZWT4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Weight | 789.392471mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tube |
| Series | TMS320DM643x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Base Part Number | 320DM6435 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.05V |
| Interface | HPI, I2C, McASP, McBSP, UART, 10/100 Ethernet MAC |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1V |
| Number of I/O | 111 |
| Memory Type | DDR2, FLASH, NAND, SDRAM, SRAM |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 8b |
| Core Architecture | TMS320 |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 2 |
| Number of Timers | 5 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.05V 1.20V |
| On Chip Data RAM | 240kB |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM6435ZWT4 Overview
It is a kind of electronic component that comes in a package of 361-LFBGA.Packaging is provided in the form of Tube.The Fixed Point family provides a wide range of applications.The mounting is carried out in the direction of Surface Mount.If it is operating at the temperature of 0°C~90°C TJ, then it will be operating normally.It refers to the analog voltage range of 1.8V 3.3V that may be input or output.The TMS320DM643x, DaVinci? series contains this digital signal processor.In order to use it, it has 361 terminations.Using 1.2V as the supply voltage, it operates.Pins are located on the 361 component.There are 361 pins in its configuration.Several related parts can be identified using its base part number, 320DM6435.The device is specifically designed to operate at the frequency of 400MHz.In order to mount it, it utiliSurface Mountes the Surface Mount method.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.In order to power this device, a voltage as low as 1V needs to be supplied.This device can be powered by 3.63V voltages.A voltage of 1.05V is used as the supply voltage.There is a possibility to configure data formats and transmission speeds for 2 UART channels configured for asynchronous serial communication.Processor core TMS320 adopts the TMS320 architecture.111 I/Os are included with the device.As far as memory type is concerned, it uses DDR2, FLASH, NAND, SDRAM, SRAM.Industrial environments have 5 timers that provide accurate feedback and trigger events.The device stores 32 pieces of information.
TMS320DM6435ZWT4 Features
Supplied in the 361-LFBGA package
Operating supply voltage of 1.05V
111 I/Os
TMS320DM6435ZWT4 Applications
There are a lot of Texas Instruments TMS320DM6435ZWT4 DSP applications.
- Signal processing for telecommunications
- Image compression
- Compression of videos
- Receivers
- Statistical signal processing
- Financial signals
- Automatic analysis system of EEG or ECG
- TVs
- House construction
- Sound navigation and ranging systems
