TMS320DM6435ZWT5
| Parameters | |
|---|---|
| Bit Size | 32 |
| Data Bus Width | 8b |
| Core Architecture | TMS320 |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 2 |
| Number of Timers | 5 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.05V 1.20V |
| On Chip Data RAM | 240kB |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 18 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Weight | 789.392471mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM643x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Base Part Number | 320DM6435 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.2V |
| Interface | HPI, I2C, McASP, McBSP, UART, 10/100 Ethernet MAC |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1V |
| Number of I/O | 111 |
| Memory Type | DDR2, FLASH, NAND, SDRAM, SRAM |
| Number of Bits | 32 |
TMS320DM6435ZWT5 Overview
Basically, it is a type of electronic component that is available in a 361-LFBGA package.Tray is the packaging method provided.In addition to meeting a wide range of requirements, it is a member of Fixed Point.Surface Mount is mounted in a manner that allows it to be moved.As long as it is operated at the temperature of 0°C~90°C TJ, it will operate normally.Voltages can be input or output within 1.8V 3.3V's analog voltage range.It is a part of the TMS320DM643x, DaVinci? series of digital signal processors.There are 361 terminations for its uses.It operates with the supply voltage of 1.2V.Pins are available for 361 components.The configuration of the device includes 361 pins.Based on its base part number of 320DM6435, many ralated parts can be found.A specific design is present for the device in order for it to operate at the frequency of 500MHz.The mounting method is Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.The minimum voltage supplied to this device is as low as 1V.This device can be powered by 3.63V voltages.In order for it to operate, 1.2V is the supply voltage.Data format and transmission speed can be configured for asynchronous serial communication on 2 UART channels.The processor core uses the architecture of the TMS320 processor.111 I/Os are available on the device.A DDR2, FLASH, NAND, SDRAM, SRAM memory type is used.Industrial environments utili5e 5 timers for accurate feedback and event activation.Upon opening the device, there are 32 pieces of information stored.
TMS320DM6435ZWT5 Features
Supplied in the 361-LFBGA package
Operating supply voltage of 1.2V
111 I/Os
TMS320DM6435ZWT5 Applications
There are a lot of Texas Instruments TMS320DM6435ZWT5 DSP applications.
- Image compression
- Instrument modeling
- Airplanes
- Automatic analysis system of EEG or ECG
- Receivers
- Remote sensing image processing technology
- Other sensor array processing
- Audio
- Digital image processing
- Finite impulse response digital filters
