TMS320DM6437ZWT7
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Weight | 789.392471mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tube |
| Series | TMS320DM643x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 90 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO REQUIRES 3.3V I/O SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 700MHz |
| Base Part Number | 320DM6437 |
| Pin Count | 90 |
| JESD-30 Code | S-PBGA-B90 |
| Operating Supply Voltage | 3.3V |
| Interface | HPI, I2C, McASP, McBSP, PCI, UART, 10/100 Ethernet MAC |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1V |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | TMS320 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| RAM (words) | 61440 |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 2 |
| Number of Timers | 5 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.05V 1.20V |
| On Chip Data RAM | 240kB |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM6437ZWT7 Overview
This is an electronic component with a 361-LFBGA package.A packaging way of Tube is provided.Fixed Point members are well suited for a wide range of applications.There is a mounting point for it along the direction of Surface Mount.If it is operating at the temperature of 0°C~90°C TJ, then it will be operating normally.In analog circuits, the analog voltage range 1.8V 3.3V represents the voltage range that is available for input or output.The TMS320DM643x, DaVinci? series incorporates this digital signal processor.The 90 terminations are used for its uses.1.2V is the supply voltage.In this component, there are pins for 90.In its configuration, 361 pins can be found.Several related parts can be identified using its base part number, 320DM6437.In order for the device to operate at 700MHz frequency, there is a specific design.Surface Mount is used as the mounting method.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.In this device, the minimum voltage is 1V.This device can be powered by 3.63V voltages.The device operates with a supply voltage of 3.3V.Data format and transmission speed can be configured for asynchronous serial communication on 2 UART channels.This electronic part can also provide additional features to ALSO REQUIRES 3.3V I/O SUPPLY.This processor core adopts the architecture of TMS320.Industrial environments use 5 timers to provide accurate feedback and event activation.
TMS320DM6437ZWT7 Features
Supplied in the 361-LFBGA package
Operating supply voltage of 3.3V
TMS320DM6437ZWT7 Applications
There are a lot of Texas Instruments TMS320DM6437ZWT7 DSP applications.
- Automobiles
- Finite impulse response digital filters
- Sonar
- Speech signal processing
- Machinery and equipment
- Radio detection and rangin systems
- Spectral density estimation
- Digital communications
- Seismology
- Geoscience signal processing
