TMS320DM6467TCUT9
| Parameters | |
|---|---|
| Memory Size | 8kB |
| Number of I/O | 33 |
| RAM Size | 32kB |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Format | FIXED-POINT |
| RAM (words) | 8192 |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Bus Compatibility | ETHERNET; I2C; SPI; UART; USB |
| Non-Volatile Memory | ROM (8kB) |
| Voltage - Core | 1.30V |
| On Chip Data RAM | 248kB |
| Length | 19mm |
| Width | 19mm |
| Thickness | 2.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 529-BFBGA, FCBGA |
| Number of Pins | 529 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | TMS320DM646x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 529 |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Base Part Number | 320DM6467 |
| Pin Count | 529 |
| Operating Supply Voltage | 1.3V |
| Interface | EBI/EMI, Ethernet, HPI, I2C, McASP, PCI, SPI, UART, USB |
| Max Supply Voltage | 1.365V |
| Min Supply Voltage | 1.235V |
TMS320DM6467TCUT9 Overview
It is a type of electronic component available in package 529-BFBGA, FCBGA.There is a packaging method of Tray provided with it.Due to its membership in Digital Media System-on-Chip (DMSoC), it is ideally suited for a wide range of uses.In order to mount it, it must be in the direction of Surface Mount.As long as it is operated at the temperature of 0°C~85°C TC, it will operate normally.In analog circuits, the analog voltage range 1.8V 3.3V represents the voltage range that is available for input or output.The TMS320DM646x, DaVinci? series incorporates this digital signal processor.The use of it is terminated by 529.A voltage of 1.3V is used as the supply voltage.Pins are located on the 529 component.Its configuration includes 529 pins.With its base part number 320DM6467, it is possible to identify a number of related parts.500MHz is a frequency at which the device operates according to a specific design.The mounting method is Surface Mount.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.The minimum voltage supplied to this device is as low as 1.235V.It is capable of receiving a maximum voltage of 1.365V.This device is powered by a voltage of 1.3V.Its memory can store 8kB data.Data format and transmission speed can be configured for asynchronous serial communication on 3 UART channels.There are 33 inputs and outputs on the device.This device stores 32 information.
TMS320DM6467TCUT9 Features
Supplied in the 529-BFBGA, FCBGA package
Operating supply voltage of 1.3V
33 I/Os
TMS320DM6467TCUT9 Applications
There are a lot of Texas Instruments TMS320DM6467TCUT9 DSP applications.
- Biometrics
- TVs
- Dam design
- Geophysical processing
- Radar
- Receivers
- Audio compression
- Automobile electronic gadgets
- Digital communications
- Smart camera
