TMS320DM8148CCYE1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 684-BFBGA, FCBGA |
| Number of Pins | 684 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | DM81x Video SOC, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 684 |
| ECCN Code | 5A992.C |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.35V |
| Terminal Pitch | 0.8mm |
| Frequency | 750MHz |
| Base Part Number | 320DM8148 |
| Pin Count | 684 |
| Power Supplies | 0.95/1.35V |
| Interface | CAN, Ethernet, I2C, McASP, McBSP, MMC/SD/SDIO, SATA, SPI, UART, USB |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.71V |
| Speed | 1000 MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.5V 1.8V 3.3V |
| Number of UART Channels | 6 |
| Non-Volatile Memory | ROM (48kB) |
| Voltage - Core | 1.1V 1.2V 1.35V |
| On Chip Data RAM | 1.08MB |
| Clock Rate | 750MHz DSP, 1GHz ARM® |
| Height | 3.06mm |
| Length | 23mm |
| Width | 23mm |
| Thickness | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM8148CCYE1 Overview
It is a kind of electronic component that comes in a package of 684-BFBGA, FCBGA.Tray is the packaging method provided.As a member of Digital Media System-on-Chip (DMSoC), it is ideally suitable for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.If it is operating at the temperature of 0°C~90°C TJ, then it will be operating normally.The analog voltage range of 1.5V 1.8V 3.3V refers to the voltage that can be input or ouput.DM81x Video SOC, DaVinci? series digital signal processors contain this digital signal processor.In terms of its uses, it has 684 terminations.This device is powered by 1.35V's supply voltage.In this component, there are pins for 684.There are 684 pins in its configuration.The base part number 320DM8148 allows identification of a wide range of related parts.To operate at 750MHz frequency, the device has a specific design.It adopts Surface Mount as its mounting way.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.In this device, the minimum voltage is 1.71V.It can be supplied with a maximum voltage of 3.47V.It receives electricity from 0.95/1.35V.It is possible to configure the data format and transfer speed of 6 UART channels for synchronous serial communication.
TMS320DM8148CCYE1 Features
Supplied in the 684-BFBGA, FCBGA package
TMS320DM8148CCYE1 Applications
There are a lot of Texas Instruments TMS320DM8148CCYE1 DSP applications.
- Real-time effects
- 3D tomography and imaging processing
- Tomography technology
- Telephone conversations
- Geophysical processing
- Geoscience signal processing
- Dam design
- Smart phones
- Smart camera
- Image compression
