TMS320DM8148CCYE2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 684-BFBGA, FCBGA |
| Number of Pins | 684 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | DM81x Video SOC, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 684 |
| ECCN Code | 5A992.C |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.35V |
| Frequency | 750MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 320DM8148 |
| Pin Count | 684 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 0.95/1.35V |
| Interface | CAN, Ethernet, I2C, McASP, McBSP, MMC/SD/SDIO, SATA, SPI, UART, USB |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.05V |
| Memory Size | 512kB |
| Nominal Supply Current | 100μA |
| Speed | 1000 MHz |
| RAM Size | 64kB |
| Memory Type | Cache, ROM, SRAM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.5V 1.8V 3.3V |
| Number of UART Channels | 6 |
| Non-Volatile Memory | ROM (48kB) |
| Voltage - Core | 1.1V 1.2V 1.35V |
| On Chip Data RAM | 1.08MB |
| Clock Rate | 750MHz DSP, 1GHz ARM® |
| Height | 3.06mm |
| Length | 23mm |
| Width | 23mm |
| Thickness | 2.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM8148CCYE2 Overview
It is a type of electronic component available in package 684-BFBGA, FCBGA.A packaging way of Tray is provided.Due to its Digital Media System-on-Chip (DMSoC) membership, it is ideal for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.At the temperature of 0°C~90°C TJ, the device is guaranteed to operate normally.The analog voltage range of 1.5V 1.8V 3.3V refers to the input or output voltage.DM81x Video SOC, DaVinci? series digital signal processors contain this digital signal processor.The terminations for its uses are 684.The voltage supplied by 1.35V is used to operate it.There are 684 component pins.Its configuration includes 684 pins.The base part number 320DM8148 allows identification of a wide range of related parts.In order for the device to operate at the frequency of 750MHz, it has been designed specifically.Using Surface Mount as a mounting method, it is mounted.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.Devices like this can be powered with as little as 1.05V volts.There is a maximum voltage supply of 3.47V to this device.A supply voltage of 3.3V is required for its operation.Its memory is capable of storing 512kB data.Electricity is supplied by 0.95/1.35V.Data format and transmission speed are configurable on 6 UART channels for asynchronous serial communication.Timer/counters with a 8-axis measure time and count external events.ARM architecture is used for this processor core.Memory type Cache, ROM, SRAM is used by it.
TMS320DM8148CCYE2 Features
Supplied in the 684-BFBGA, FCBGA package
Operating supply voltage of 3.3V
8 timers/counters
TMS320DM8148CCYE2 Applications
There are a lot of Texas Instruments TMS320DM8148CCYE2 DSP applications.
- Audio signal
- Finite impulse response digital filters
- Radio detection and rangin systems
- Digital image processing, data compression
- Digital hardware
- Speech processing and recognition
- Vehicle electronics
- Computers and laptop
- Image compression
- Control systems
