TMS320DM8148SCYEA0
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 684-BFBGA, FCBGA |
| Number of Pins | 684 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | DM81x Video SOC, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 684 |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 720MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 320DM8148 |
| Pin Count | 684 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.1/1.35V |
| Interface | CAN, Ethernet, I2C, McASP, McBSP, MMC/SD/SDIO, SATA, SPI, UART, USB |
| Number of I/O | 128 |
| RAM Size | 64kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.5V 1.8V 3.3V |
| Number of UART Channels | 6 |
| Number of Cores | 2 |
| Non-Volatile Memory | ROM (48kB) |
| Voltage - Core | 1.1V 1.2V 1.35V |
| On Chip Data RAM | 1.08MB |
| Clock Rate | 600MHz DSP, 720MHz ARM® |
| Height | 3.06mm |
| Length | 23mm |
| Width | 23mm |
| Thickness | 2.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM8148SCYEA0 Overview
It is a type of electronic component available in package 684-BFBGA, FCBGA.There is a packaging method of Tray provided with it.The fact that it belongs to the Digital Media System-on-Chip (DMSoC) family means that it can be applied to a wide range of applications.The mounting of the device is done in the direction of Surface Mount.As long as it is operated at the temperature of -40°C~105°C TJ, it will operate normally.The analog voltage range of 1.5V 1.8V 3.3V refers to the voltage that can be input or ouput.The DM81x Video SOC, DaVinci? series incorporates this digital signal processor.For its use, it has 684 terminations.The voltage supplied by 1.2V is used to operate it.Pins are available for 684 components.An overview of its configuration can be found in the section on 684 pins.With its base part number of 320DM8148, many related parts can be identified.It is specifically designed to operate with the frequency of 720MHz.Surface Mount is used as the mounting method.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.This device is powered by a voltage of 1.2V.A 1.1/1.35V electric power source is used to power it.The 6 UART channels are configured to support asynchronous serial transmissions of data in a format and speed that can be configured.The architecture of this processor core is ARM.The device is equipped with 128 I/Os.2-cores are installed in it.
TMS320DM8148SCYEA0 Features
Supplied in the 684-BFBGA, FCBGA package
Operating supply voltage of 1.2V
128 I/Os
2 cores
TMS320DM8148SCYEA0 Applications
There are a lot of Texas Instruments TMS320DM8148SCYEA0 DSP applications.
- Geoscience signal processing
- Tomography technology
- Airplanes
- Sound navigation and ranging systems
- Consumer electronic gadgets
- Biometrics
- Radar
- Processing system
- Digital hardware
- Fourier transform
