TMS32C6415EZLZ7E3
| Parameters | |
|---|---|
| Number of Timers | 3 |
| Number of External Interrupts | 4 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Number of DMA Channels | 64 |
| Height | 3.25mm |
| Length | 23mm |
| Width | 23mm |
| Thickness | 2.61mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | FCBGA |
| Number of Pins | 532 |
| Weight | 3.094606g |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 532 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 90°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO REQUIRES 3.3VI/O SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.8mm |
| Frequency | 720MHz |
| Pin Count | 532 |
| Operating Supply Voltage | 1.4V |
| Power Supplies | 1.43.3V |
| Temperature Grade | OTHER |
| Interface | PCI |
| Max Supply Voltage | 3.46V |
| Min Supply Voltage | 1.36V |
| Memory Size | 128kB |
| Memory Type | SDRAM, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 125mA |
| Bit Size | 32 |
| Frequency (Max) | 720MHz |
| Data Bus Width | 32b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 16 |
| Format | FIXED POINT |
| Integrated Cache | YES |
TMS32C6415EZLZ7E3 Overview
Basically, it is a type of electronic component that is available in a FCBGA package.532 terminations are available for its use.It works with a voltage of 1.4V as a supply voltage.In this component, there are pins for 532.An overview of its configuration can be found in the section on 532 pins.In order for the device to operate at 720MHz frequency, there is a specific design.A Surface Mount mounting method is used for its mounting.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.It is possible to supply as low a voltage as 1.36V to this device.Devices like this can be powered by voltages up to 3.46V.1.4V is the supply voltage for this device.It can store 128kB data in its memory.It is supplied with 1.43.3V electric power.This electronic part can also provide additional features to ALSO REQUIRES 3.3VI/O SUPPLY.This system uses DIGITAL SIGNAL PROCESSOR, OTHER as its uPs, uCs, and peripheral ICs.Memory type SDRAM, SRAM is used by it.It is recommended that the operating temperature be lower than 90°C.It is recommended that the operating temperature exceeds 0°C.Industrial environments have 3 timers that provide accurate feedback and trigger events.4 interrupts are caused by external sources.The maximum value of its frequency should be kept below 720MHz.In order to transfer data without overloading the CPU, 64 DMA channels are used.A 16 programmable I/O is used for data transmission.
TMS32C6415EZLZ7E3 Features
Supplied in the FCBGA package
Operating supply voltage of 1.4V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
TMS32C6415EZLZ7E3 Applications
There are a lot of Texas Instruments TMS32C6415EZLZ7E3 DSP applications.
- Audio compression
- Infinite impulse response filters
- Boats
- Audio
- MP3 audio player
- Speech signal processing
- Smart camera
- Digital camera
- Remote sensing image processing technology
- 3D tomography and imaging processing
