TPA6100A2DGKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 469mW |
| Technology | CMOS |
| Voltage - Supply | 1.6V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6100 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.6V |
| Number of Channels | 2 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 469mW |
| Output Power | 50mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Gain | 1 dB |
| Max Output Power | 50mW |
| Max Output Power x Channels @ Load | 50mW x 2 @ 16 Ω |
| Harmonic Distortion | 0.1% |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6100A2DGKRG4 Overview
I have embedded this device in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Ideally, the chip should be packaged in a Tape & Reel (TR) case.In addition, there are 8 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, Headphones, 2-Channel (Stereo) is used as the output.The device is of type Class AB .Computers or other communication devices have 8 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .In this electrical device, the supply voltage is 1.6V~3.6V .The chip is equipped with 2 channels.Depop, Short-Circuit and Thermal Protection, Shutdown can be ensured when operating.The operating temperature should not exceed -40°C~85°C TA °C.A total of 8 pins are present on the device.The part belongs to Audio/Video Amplifiers .Amp parts is included in the TPA6100 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 50mW kWh per hour.A normal operation requires a supply voltage (Vsup) above 1.6V .3.6V represents the maximal supply voltage (Vsup).There is a Single supply type on this electronic part.
TPA6100A2DGKRG4 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
TPA6100 family
50mW kWh per hour
TPA6100A2DGKRG4 Applications
There are a lot of Texas Instruments TPA6100A2DGKRG4 audio amplifiers applications.
- Portable electronic products powered by batteries
- Band-pass filter
- pH (acidity)
- Precision measurement
- Integrator and differentiator circuits
- Oscilloscopes
- Professional videography
- Proportional operation circuits
- Radar
- Video conversion and routing
