TPA6120A2DWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IT CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.8W |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~30V ±5V~15V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA6120 |
| Pin Count | 20 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Number of Channels | 2 |
| Nominal Supply Current | 26mA |
| Power Dissipation | 2.8W |
| Output Power | 80mW |
| Common Mode Rejection Ratio | 100 dB |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 22 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Dual Supply Voltage | 15V |
| Max Output Power | 80mW |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 12V |
| Max Output Power x Channels @ Load | 80mW x 2 @ 600 Ω |
| Load Impedance | 32Ohm |
| Height | 2.65mm |
| Length | 12.82mm |
| Width | 7.52mm |
| Thickness | 2.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6120A2DWPR Overview
The device is embedded in 20-SOIC (0.295, 7.50mm Width) Exposed Pad .Ideally, the chip should be packaged in a Tape & Reel (TR) case.There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.In the configuration, Headphones, 2-Channel (Stereo) is used as the output.The device is of type Class AB .In a computer or other communication device, there are 20 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .In this electrical device, the supply voltage is 10V~30V ±5V~15V .This device is equipped with a total of 2 channels.Amp parts is possible to guarantee Differential Inputs, Short-Circuit and Thermal Protection when operating.No temperature higher than -40°C~85°C TA should be used for operations.There are 20 pins present on this device.As part of Audio/Video Amplifiers , this part is included.Amp parts is included in the TPA6120 family.The maximal Output Power of this electronic part is 80mW kWh per hour.Amp parts is an electronic part wAmp partsh a supply type of Dual, Single .Furthermore, IT CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY is one of its characteristics.
TPA6120A2DWPR Features
20-SOIC (0.295, 7.50mm Width) Exposed Pad package
20 pin count
TPA6120 family
80mW kWh per hour
TPA6120A2DWPR Applications
There are a lot of Texas Instruments TPA6120A2DWPR audio amplifiers applications.
- pH (acidity)
- Signal operation
- Video conversion and routing
- Video and image computer boards
- Scintillation detectors
- Inverse/same-phase proportional circuit
- Radar
- Oscilloscopes
- Power control
- High input resistance broadband
