TPA6211A1DGNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.13W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6211 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 4mA |
| Power Dissipation | 2.13W |
| Quiescent Current | 4mA |
| Output Power | 3.1W |
| Common Mode Rejection Ratio | 63 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -85dB |
| Max Output Power | 3.1W |
| Max Output Power x Channels @ Load | 3.1W x 1 @ 3 Ω |
| Harmonic Distortion | 10% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6211A1DGNRG4 Overview
This package is embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .Amp parts is packaged in the way of Tape & Reel (TR) .There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The output it is configured with uses 1-Channel (Mono) .The device is of type Class AB .8 pins are pronged contacts on a computer or other communication device that form a signal interface.There is an electronic part mounted in the way of Surface Mount .There is 2.5V~5.5V voltage supply to this electrical device.1 channels are provided by the device.Ensure that Depop, Differential Inputs, Shutdown, Thermal Protection is maintained when operating.Temperatures should not exceed -40°C~85°C TA .The number of pins is 8 .This chip belongs to Audio/Video Amplifiers .Amp parts is a member of the family TPA6211 .According to the manufacturer, the maximum output power of this electronic component is 3.1W kWh per hour.Amp parts is important to keep the supply voltage (Vsup) above 2.5V so that the device functions normally.During this time, the maximum supply voltage (Vsup) reaches 5.5V .Single is the type of supply for this electronic part.The device is powered by a voltage supply of 3/5V volts.The device consumes 4mA quiescent current and is unaffected by external influences.
TPA6211A1DGNRG4 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA6211 family
3.1W kWh per hour
TPA6211A1DGNRG4 Applications
There are a lot of Texas Instruments TPA6211A1DGNRG4 audio amplifiers applications.
- Switching amplifier
- Medical instruments
- Displayers for aircraft and air transportation control systems
- Proportional operation circuits
- Addition and subtraction operation circuits
- Signal filtering
- Weak signal detection
- Instrumentation
- Test and measurement instruments
- Test equipment
