TPPM0115D
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPPM0115 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12.6V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 11.4V~12.6V |
| Output Power | 400mW |
| Control Features | Phase Control, Power Good |
| Input Voltage (Min) | 11.4V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 200kHz |
| Clock Sync | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
TPPM0115D Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 2 output generation. There is a Tube solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). Voltages 11.4V~12.6V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a 0°C~70°C TA dc switcher. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Phase Control, Power Good. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. A variety of 8 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include HYSTERETIC CURRENT MODE. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "TPPM0115". The switching converter has a total of 8 pins. It is recommended that the dc dc voltage regulator's minimum input voltage be 11.4V. The test statistics indicate that DC regulator outputs a voltage of 2.5V. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. This Surface Mount makes DC switcher suitable for most prototypes and applications. It is estimated that this dc regulatorhas a maximum frequency of 200kHz. A circuit should contain 12.6V in order to ensure the voltage regulator dc to dc runs safely and reliably.
TPPM0115D Features
Transistor Driver Outputs
Phase Control, Power Good
HYSTERETIC CURRENT MODE
TPPM0115D Applications
There are a lot of Texas Instruments TPPM0115D DC to DC converter applications.
- Program control systems
- CMM
- Domestic water pumps
- Direct power supply system
- Post equipment
- Smart grid
- Surge protection circuits
- Current source circuits
- Various CNC machine tools
- Medical equipment
