TPS2011APWPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2011 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2011APWPR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the 14-PowerTSSOP (0.173, 4.40mm Width) package as well.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There is a default setting of 1 for output.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the TPS2011 family.The termination count is 14.The 14 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 600mA when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way.This LED driver is equipped with a total of 14 pins.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.It is recommended to set the supply voltage to 5.5V for optimum efficiency.This LED driving board can accept voltages up to 5.5V volts as an input.A voltage of 2.7V volts is the minimum input voltage.
TPS2011APWPR Features
Supplied from 3.3V
1 channels
TPS2011APWPR Applications
There are a lot of Texas Instruments TPS2011APWPR Power Switches ICs applications.
- HDD and SSD
- Portable Devices
- Set-Top Boxes
- Smart Phones, Feature Phones
- USB Protection
- PC Card Hot Swap
- Wearable Devices
- USB Power Distribution
- Smartphone and PDA
- Portable GPS Device
