TPS23753PW
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 1.2Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Frequency | 248kHz |
| Base Part Number | TPS23753 |
| Pin Count | 14 |
| Operating Supply Voltage | 57V |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 580μA |
| Output Current | 1.1A |
| Power - Max | 13W |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.85mA |
| Nominal Input Voltage | 57V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Min Current Limit | 405mA |
| Max Duty Cycle | 80 % |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS23753PW Overview
There is an embedded version of it in the Tube package.It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width).The type of this PoE controller is Controller (PD), DC/DC.Currently, there are a number of channels that are strong or weak: 1.Ensure the reliability of the PoE by operating it at -40°C~125°C.In order to operate this electrical Po E controller, it requires a voltage of 0V~57V as a supply voltage.An associated part can be established based on the base part number TPS23753.A 14 termination involves terminating a transmission line with a power over ethernet controller whose characteristic impedance matches the line's.It is estimated that this electrical ethernet over power controller has a maximum power of 13W Watts.The ethernet over power controller has 14 pins.Switching Regulator or Controllers includes this Po E controller in its package.In order to make it work, it has 14 pins on it.A transistor has a peak reflow temperature (Cel) of 260.It is recommended that the supply voltage be greater than 48V.The maximal current (Isup) supplied for its operation reaches 0.85mA.To function properly, 580μA needs a supply current.The frequency of this electrical PoE ethernet controller is 248kHz.1.1A possesses a high output current, which makes it possible for it to provide maximum design flexibility.There is a voltage of 57V in the operating supply of this PoE controller.Its resistance is 1.2Ohm (*), which is its value.
TPS23753PW Features
Tube package
14 pin count
14 pins
The output current of 1.1A
1.2Ohm (Ω)
TPS23753PW Applications
There are a lot of Texas Instruments TPS23753PW Power Over Ethernet (PoE) Controllers applications.
- IP Phone Power Management
- Security Cameras
- High Power Wireless Data Systems
- Dual Signature PD/Forced UPOE
- Pass-through System
- Commercial Information Displays
- Multiband access points
- Midspan Applications
- WLAN Access Points
- Routers
