TPS2375D
| Parameters | |
|---|---|
| Nominal Input Voltage | 57V |
| Internal Switch(s) | Yes |
| Min Current Limit | 405mA |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Controller (PD) |
| Resistance | 1Ohm |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Base Part Number | TPS2375 |
| Pin Count | 8 |
| Output Voltage | 400mV |
| Operating Supply Voltage | 57V |
| Number of Channels | 1 |
| Operating Supply Current | 240μA |
| Output Current | 2mA |
| Adjustable Threshold | NO |
| Output Power | 12.95W |
| Supply Current-Max (Isup) | 0.45mA |
TPS2375D Overview
As part of the Tube package, PoE controller is embedded.8-SOIC (0.154, 3.90mm Width) is how it's packaged.The type of this PoE controller is Controller (PD).It has been reported that the number of channels is growing strongly/weakly: 1.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~85°C.There is a voltage of 0V~57V that is used for the supply voltage of this electrical Po E controller.An associated part can be established based on the base part number TPS2375.8 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.In addition, it is equipped with a 8 pin count.This Po E controller is included in Power Management Circuits.The board has 8 pins.There is a peak reflow temperature of 260 for this electrical ethernet power controller.It is necessary to have a greater voltage than 48V in the supply.It reaches 0.45mA when it receives the maximal current (Isup).For 240μA to be able to fully perform its function, a supply current needs to be provided.As a result of the output current of 2mA, it offers maximum design flexibility.The operating supply voltage of this PoE controller is 57V.A resistance of 1Ohm (*) is measured on this PoE controller.The output power of this ethernet over power controller is 12.95W.In this case, 400mV is the output voltage of the power over ethernet controller.
TPS2375D Features
Tube package
8 pin count
8 pins
The output current of 2mA
1Ohm (Ω)
TPS2375D Applications
There are a lot of Texas Instruments TPS2375D Power Over Ethernet (PoE) Controllers applications.
- Pico-base Stations
- Switches
- High Power Wireless Data Systems
- Commercial Information Displays
- High Temperature Industrial Applications
- Pass-through System
- VoIP Phones
- Non-Compliant, Application Specific Devices
- Higher Power Ethernet Powered Devices
- High power (>12.95 W) powered devices
