TPS2551DBVRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS2551 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 85m Ω |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2551DBVRG4 Overview
It is package in Tape & Reel (TR) case.It is included with the SOT-23-6 package as well.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Slew Rate Controlled features.It belongs to the TPS2551 family.A total of 6 terminations have been recorded.The operation is carried out using the 6 pins.There are 1 functions of the LED driver.The LED driver output is limited to 1.1AV.It is possible to obtain high efficiency with a supply voltage of 3.3V.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 6 pins.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.5V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 1 channels.
TPS2551DBVRG4 Features
Supplied from 3.3V
1 channels
TPS2551DBVRG4 Applications
There are a lot of Texas Instruments TPS2551DBVRG4 Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS Device
- Solid-State Drives
- Telecom and Network Systems
- HDD and SSD
- USB Power Distribution
- Wireless Modem Data Cards
- USB Power Distribution
- Set-top-box
- Low Voltage I/O System Power
