TPS40007DGQG4

10 Terminals 2.25V~5.5V 10-Pin TPS40007 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40007DGQG4
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: -
Stock: 892
Description: 10 Terminals 2.25V~5.5V 10-Pin TPS40007 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	TPS40007
Function	Step-Down
Number of Outputs	1
Output Voltage	2.5V
Output Type	Transistor Driver
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	1.5mA
Control Features	Current Limit, Enable, Soft Start
Topology	Buck
Min Input Voltage	2.25V
Control Mode	VOLTAGE-MODE
Frequency - Switching	300kHz
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	700mV
Switcher Configuration	PUSH-PULL
Max Frequency	350kHz
Duty Cycle (Max)	94%
Clock Sync	No
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40007DGQG4 Overview

It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 2.25V~5.5V and has a 2.25V~5.5V supply voltage. Work well in dc switchers with a -40°C~85°C TA. A switching controller such as this can switch at a value of 300kHz . dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Soft Start which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 10 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. A search for "TPS40007" will reveal other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Test statistics indicate DC regulator outputs 2.5V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 15A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 350kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V. In dormant mode, 1.5mA is used. In order to limit the voltage of a dc switcher whose maximum input voltage is 5.5V, it must be limited by the user. There must be a 2.25V supply voltage. Lowest voltage output of the voltage controller must be greater than 700mV.