TPS40009DGQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40009 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 2.25V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 700kHz |
| Duty Cycle (Max) | 93% |
| Clock Sync | No |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40009DGQR Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 2.25V~5.5V voltage is supplied to the dc control and used for operating it. A -40°C~85°C TA dc switcher is not a problem. The switching controller can be switched at 600kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Enable, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 10 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. A search for "TPS40009" will reveal other relevant dc to dc converter ics. Pins number 10 of switching converter in total. Input voltage of dc dc voltage regulator must be 2.25V. DC regulator outputs 4V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 15A. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulators have a maximum frequency of 700kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 5.5V to the voltage regulator dc to dc. DC switchings that are dormant use 1.5mA.
TPS40009DGQR Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
TPS40009DGQR Applications
There are a lot of Texas Instruments TPS40009DGQR DC to DC converter applications.
- Balance equipment
- seismic instrument power circuits
- Machining centers
- Industrial controllers
- Special machining machine tools
- Elevator lighting
- Electrical distribution systems
- Scientific research
- Overvoltage protection circuits in TV sets
- Product burn-in
