TPS40040DRBTG4

8 Terminals 2.25V~5.5V 8-Pin TPS40040 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40040DRBTG4
Package: 8-VDFN Exposed Pad
Datasheet: -
Stock: 879
Description: 8 Terminals 2.25V~5.5V 8-Pin TPS40040 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-VDFN Exposed Pad
Surface Mount	YES
Number of Pins	8
Weight	24.012046mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS40040
Function	Step-Down
Number of Outputs	1
Output Voltage	4.95V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	2mA
Control Features	Enable
Max Output Voltage	4.95V
Topology	Buck
Min Input Voltage	2.25V
Control Mode	VOLTAGE-MODE
Frequency - Switching	300kHz
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	600mV
Switcher Configuration	PUSH-PULL
Max Frequency	350kHz
Duty Cycle (Max)	95%
Clock Sync	No
Height	1mm
Length	3mm
Width	3mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TPS40040DRBTG4 Overview

This switching controller fits most application requirements since it is packaged in a 8-VDFN Exposed Pad package. For outputs of 1, this dc motor controller is suitable. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 2.25V~5.5V and has a 2.25V~5.5V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 300kHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. TPS40040 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. According to the test statistics, DC regulator outputs 4.95V voltage. You should note that the dc dc regulator's usual output current is 15A. There is a maximum frequency of 350kHz on this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V is used to better suit the DC to DC voltage regulator's situation. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V. In a dormant state, the dc switching uses 2mA. Because the dc switcher's maximum input voltage is 5.5V users must limit the voltage accordingly. Voltage 2.25V must be supplied. There will be 15A output current greater than 15A from the dc switcher. Its datasheet indicates the switching converter can output a maximum of 4.95V volts. A voltage controller's lowest output voltage cannot be less than 600mV.