TPS40057PWPG4
| Parameters | |
|---|---|
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 520kHz |
| Base Part Number | TPS40057 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Max Output Voltage | 6V |
| Topology | Buck |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 24V |
| Switcher Configuration | PUSH-PULL |
| Input Current | 5mA |
TPS40057PWPG4 Overview
As a result of 16-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tube enclosure. The program can handle Transistor Driver dc switching's outputs (s). 8V~40V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at Up to 1MHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 16 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 24V. TPS40057 can be used to locate other relevant dc to dc converter ics. There are 16 pins on switching converter. Statistically, DC regulator outputs 6V volts. If you start a project, note down the dc dc regulator's usual output current of 20A. The Surface Mount makes DC switcher suitable for most applications and prototypes. The switching controller works at a frequency of 520kHz. During dormancy, the dc switching uses 1.5mA. You can set the input voltage to 24V for nominal working status. The maximum input voltage of this dc switcher is 40V, so users must limit the voltage accordingly. A voltage of 8V is required for the supply. Datasheets indicate that the switching converter can output 6V volts at its maximum. 5mA current flow input could be used to operate the switching converter .
TPS40057PWPG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 520kHz
TPS40057PWPG4 Applications
There are a lot of Texas Instruments TPS40057PWPG4 DC to DC converter applications.
- Analog precision reference circuits
- Energy management systems
- Precision electronic equipment
- Boring machines
- Low output voltage switching power supply circuits
- Geothermal power
- Household control circuits
- Lathes
- seismic instrument power circuits
- Constant current circuits
