TPS40100RGE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS40100 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~18V |
| Control Features | Current Limit, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle | 85 % |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TPS40100RGE Overview
This switching controller fits most application requirements since it is packaged in a 24-VFQFN Exposed Pad package. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. 4.5V~18V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 100kHz~600kHz. dc dc regulator is made easier with Surface Mount. Current Limit, Frequency Control, Power Good, Soft Start, Tracking provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the QUAD position. Different dc switching's functions can be applied to 24 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics can be found by searching "TPS40100". There are 24 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 5.5V volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sA frequency of 600kHz is used by the switching controller. Switching controller is necessary to supply a voltage of 12V.
TPS40100RGE Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 600kHz
TPS40100RGE Applications
There are a lot of Texas Instruments TPS40100RGE DC to DC converter applications.
- Printing equipment
- Serial communication converter
- Energy management systems
- Driver circuits
- Network technology
- Plate bending machines
- Elevator lighting
- Injection molding machinery
- Flexible manufacturing cells
- Experimental setup
