TPS40130RHBR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS40130 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50A |
| Voltage - Supply (Vcc/Vdd) | 3V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1.2MHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.2MHz |
| Duty Cycle (Max) | 87.5% |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40130RHBR Overview
With a 32-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 2 numbers. A solid enclosure of Tape & Reel (TR) surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 3V~40V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 100kHz~1.2MHz. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a QUAD terminal on the switching converters. 32 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. Other relevant dc to dc converter ics can be found by searching "TPS40130". Pins number 32 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. DC regulator outputs 4V voltage based on test statistics. Voltages 5.5V are the maximum that the dc to dc regulator will accept. normally, the dc dc regulator's output current is 50A, which you should keep in mind when starting a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIt is estimated that this dc regulatorhas a maximum frequency of 1.2MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V.
TPS40130RHBR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS40130RHBR Applications
There are a lot of Texas Instruments TPS40130RHBR DC to DC converter applications.
- Industrial robots
- Refrigerators of central air conditioners
- Digital precision reference circuits
- Grinders
- Cutting machine tools
- Computer rooms
- Program control systems
- Die casting equipment
- Bending machines
- Household control circuits
