TPS40197RGYT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 37.194574mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 520kHz |
| Base Part Number | TPS40197 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.2V |
| Output Type | Transistor Driver |
| Max Output Current | 6A |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~14V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Power Good |
| Max Output Voltage | 1.2V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 14V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1mm |
| Length | 4mm |
| Width | 3.5mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40197RGYT Overview
Capsuled in the 16-VFQFN Exposed Pad package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 4.5V~14V. Worked in an dc switcher with a -40°C~85°C TA rating. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Power Good is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at QUAD. A variety of dc switching's functions can be performed on 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. In addition to "TPS40197", there are other relevant dc to dc converter ics you can find. In total, switching converter has 16 pins. Test statistics indicate DC regulator outputs 1.2V voltage. If you start a project, note down the dc dc regulator's usual output current of 6A. There is 520kHz frequency setting on the switching controller. As long as the dc switching is in a dormant state, it utilizes 2.5mA. The dc switcher's maximum input voltage is 14V, so users must limit the voltage accordingly. 4.5V is the required supply voltage. There will be 6A output current greater than 6A from the dc switcher. Datasheets indicate that the switching converter can output 1.2V volts at its maximum. Its lowest voltage output is not less than 900mV.
TPS40197RGYT Features
Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Frequency: 520kHz
TPS40197RGYT Applications
There are a lot of Texas Instruments TPS40197RGYT DC to DC converter applications.
- Analog precision reference circuits
- Digital precision reference circuits
- Packaging
- seismic instrument power circuits
- Large fire protection systems
- Scientific testing
- Arc suppression circuits
- Various CNC machine tools
- Production lines
- Injection molding machinery
