TPS40400RHLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40400 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 30A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 3V~20V |
| Quiescent Current | 6mA |
| Control Features | Power Good, Tracking |
| Topology | Buck |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Max Duty Cycle | 90 % |
| Serial Interfaces | PMBus |
| Height | 1mm |
| Length | 5.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40400RHLR Overview
Capsuled in the 24-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 3V~20V. Work well in dc switchers with a -40°C~125°C TJ. This switching controller can switch at 200kHz~2MHz. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Power Good, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. Various 24 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "TPS40400". There are 24 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 600mV. It's important to remember that the dc dc regulator's normaloutput current is 30A, so you should note it down when starting a new project. voltage regulator dc to dcs with a 90 % duty cycle are designed to be reliable when powered on and powered off. 2MHz is the maximum frequency of this dc regulators. When the dc switching is dormant, it uses 6mA. Because the dc switcher's maximum input voltage is 20V users must limit the voltage accordingly. There must be a 3V supply voltage. DC switchers cannot produce output currents greater than 30A.
TPS40400RHLR Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Power Good, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
TPS40400RHLR Applications
There are a lot of Texas Instruments TPS40400RHLR DC to DC converter applications.
- Wind power
- Large fire protection systems
- ATMs
- Product burn-in
- Correction machines
- Combined machine tools
- Fire elevators
- Industrial controllers
- Various CNC machine tools
- Precision electronic equipment
