TPS40425RHAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | VOUT FROM 0.6 V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS40425 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~20V |
| Quiescent Current | 18mA |
| Control Features | Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~1.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Serial Interfaces | PMBus |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40425RHAR Overview
This switching controller fits most application requirements since it is packaged in a 40-VFQFN Exposed Pad package. It is sufficient to generate 2 outputs with this dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~20V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Switching can be done at 200kHz~1.5MHz with this switching controller. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Phase Control, Power Good. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the QUAD position. The 40 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "TPS40425". Pins number 40 of switching converter in total. The minimum input voltage of the dc dc voltage regulator should be 4.5V. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. To better satisfy the need, DC to DC voltage regulator has a value of VOUT FROM 0.6 V. To run the voltage regulator dc to dc safely and reliably, users should apply 20V to the voltage regulator dc to dc. DC switching uses 18mA when it is dormant.
TPS40425RHAR Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1.5MHz
Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
VOUT FROM 0.6 V
TPS40425RHAR Applications
There are a lot of Texas Instruments TPS40425RHAR DC to DC converter applications.
- Radio equipment
- PSRR circuits
- Current source circuits
- Electric water heaters
- Planers
- USB circuits
- Telecommunications equipment
- Window air conditioners
- Die casting equipment
- Sensitive electronic devices
