TPS43330AQDAPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS43330 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 11V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~40V |
| Quiescent Current | 30μA |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Topology | Buck, Boost |
| Frequency - Switching | 150kHz~600kHz |
| Synchronous Rectifier | Yes |
| Max Frequency | 600kHz |
| Max Duty Cycle | 98.75 % |
| Duty Cycle (Max) | 90%, 98.75% |
| Output Phases | 2 |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS43330AQDAPRQ1 Overview
Capsuled in the 38-PowerTSSOP (0.240, 6.10mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 3 numbers. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4V~40V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 150kHz~600kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Other relevant dc to dc converter ics will be returned if you search "TPS43330". Pins number 38 of switching converter in total. DC regulator outputs 11V voltage according to the test statistics. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 98.75 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. It is estimated that this dc regulatorhas a maximum frequency of 600kHz. When running the voltage regulator dc to dc in a circuit, users should apply 40V to ensure safety and reliability. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. When the dc switching is dormant, it uses 30μA.
TPS43330AQDAPRQ1 Features
Transistor Driver Outputs
Switching Frequency: 150kHz~600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
Max Duty Cycle: 98.75 %
TPS43330AQDAPRQ1 Applications
There are a lot of Texas Instruments TPS43330AQDAPRQ1 DC to DC converter applications.
- Plate bending machines
- PSRR circuits
- Drilling machines
- Die casting equipment
- Machining centers
- Television equipment
- Hydrogen power
- Surge protection circuits
- Remotely powered electric motors
- Automatic plug-in machines
