TPS51113DRCR
| Parameters | |
|---|---|
| Control Features | Enable, Power Good |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 13.2V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 330kHz |
| Max Duty Cycle | 72 % |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS51113 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.2V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
TPS51113DRCR Overview
Capsuled in the 10-VFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~13.2V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It can switch at 300kHz. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Power Good. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 10 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 12V. A search for "TPS51113" will reveal other relevant dc to dc converter ics. Pins number 10 of switching converter in total. Statistically, DC regulator outputs 28V volts. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 72 % on power-up or power-down to ensure reliability. 330kHz is the maximum frequency of this dc regulators. A circuit should contain 13.2V in order to ensure the voltage regulator dc to dc runs safely and reliably. The dc switcher's maximum input voltage is 13.2V; users must limit it accordingly. Voltage 4.5V must be supplied.
TPS51113DRCR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 72 %
TPS51113DRCR Applications
There are a lot of Texas Instruments TPS51113DRCR DC to DC converter applications.
- Handheld GPS
- Computer-related products
- Correction machines
- Domestic water pumps
- Balance equipment
- Hydrogen power
- Production lines
- Telecommunications equipment
- Smoke exhaust equipment
- Various CNC machine tools
