TPS51120RHBTG4

32 Terminals 4.5V~28V 32-Pin TPS51120 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS51120RHBTG4
Package: 32-VFQFN Exposed Pad
Datasheet: -
Stock: 843
Description: 32 Terminals 4.5V~28V 32-Pin TPS51120 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	32-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	32
Weight	71.809342mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	D-CAP™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	32
Termination	SMD/SMT
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	2.6W
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Frequency	580kHz
Base Part Number	TPS51120
Function	Step-Down
Number of Outputs	2
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	20A
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Power Dissipation	2.6W
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~28V
Quiescent Current	750μA
Control Features	Enable, On Time Control, Power Good
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	CURRENT-MODE
Max Input Voltage	28V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Nominal Input Voltage	12V
Min Output Voltage	1.05V
Switcher Configuration	PUSH-PULL
Switching Frequency	580kHz
Clock Sync	No
Duty Cycle	88 %
Output Phases	1
Height	1mm
Length	5mm
Width	5mm
Thickness	900μm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS51120RHBTG4 Overview

This switching controller fits most application requirements since it is packaged in a 32-VFQFN Exposed Pad package. The dc motor controller is adquate to generate for 2 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. 4.5V~28V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~85°C TA rating. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, On Time Control, Power Good. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at QUAD. There are many different types of terminations for 32. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. In addition to "TPS51120", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 32. Statistically, DC regulator outputs 5.5V volts. You should note down the dc dc regulator's usual output current of 20A when you start a project. 580kHz is the frequency of the switching controller. There are several dc to dc voltage regulator in the D-CAP? series. DC switching uses 750μA when it is dormant. For nominal working status, the input voltage can be set as 12V. The maximum input voltage of the dc switcher is 28V, so users need to limit the voltage accordingly. 4.5V is the required supply voltage. DC switchers cannot produce output currents greater than 20A. As per its datasheet, the switching converter has a maximum output of 5.5V volts. The voltage controller's lowest voltage output is not less than 1.05V. The frequency at which this controller can perform well is 580kHz.