TPS5120QDBTREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS5120 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 7V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 1.1mA |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Dropout Voltage | 200mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 83% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5120QDBTREP Overview
This switching controller fits most application requirements since it is packaged in a 30-TFSOP (0.173, 4.40mm Width) package. There is enough capacity in the dc motor controller to generate the output for the 2 input. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 4.5V~28V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Using this switching controller, it is possible to switch at 300kHz. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Power Good, Soft Start. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at DUAL. An array of 30 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input of 7V. TPS5120 can be searched for other relevant dc to dc converter ics. There are only 30 pins on switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. According to the test statistics, DC regulator outputs 900mV voltage. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator's maximum frequency is 500kHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 28V. A dc switching in a dormant state uses 1.1mA.
TPS5120QDBTREP Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS5120QDBTREP Applications
There are a lot of Texas Instruments TPS5120QDBTREP DC to DC converter applications.
- Smoke exhaust equipment
- Combined machine tools
- Ball screw pair
- Electric heating, lighting
- Imported equipment
- Gear/thread machining machines
- Industrial robots
- seismic instrument power circuits
- Magnetohydrodynamic power
- Boring machines
