TPS5120QDBTRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 92.787989mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS5120 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 7V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 1.1mA |
| Control Features | Enable, Power Good, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Dropout Voltage | 200mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 83% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5120QDBTRQ1 Overview
As a result of 30-TFSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 2. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. dc controls with 4.5V~28V voltage are supplied and operated. Qualified to work in a -40°C~125°C TJ dc switcher. The switching controller can be switched at 300kHz. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable, Power Good, Soft Start which allows efficient switching control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 30. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 7V. Other relevant dc to dc converter ics can be found by searching "TPS5120". Switching converter has a total of 30 pins. Based on the test statistics, DC regulator outputs voltage 900mV. The dc dc regulator's usual output current is 1.5A, which should be noted down when you start a project. There is a maximum frequency of 500kHz for this dc regulators. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. During dormancy, the dc switching uses 1.1mA. The maximum input voltage of this dc switcher is 28V, so users must limit the voltage accordingly. A voltage of 4.5V is required for the supply. Input current cannot exceed 1.5A with this dc switcher.
TPS5120QDBTRQ1 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS5120QDBTRQ1 Applications
There are a lot of Texas Instruments TPS5120QDBTRQ1 DC to DC converter applications.
- Balance equipment
- Large fire protection systems
- PSRR circuits
- Combined machine tools
- Boring machines
- Machining centers
- seismic instrument power circuits
- Thermal power
- Surface processing equipment
- Computer rooms
