TPS53129PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS53129 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Current Limit, Enable, Soft Start |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 700kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53129PW Overview
It comes in a 24-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~24V voltage are supplied and operated. Worked in an dc switcher with a -40°C~85°C TA rating. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Soft Start which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 24 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5.5V. In addition to "TPS53129", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 24 pins. Statistically, DC regulator outputs 5.5V volts. There is a maximum frequency of 700kHz on this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 24V to the voltage regulator dc to dc. A dc to dc voltage regulator in the D-CAP2? series, it belongs to this family. When the dc switching is dormant, it uses 450μA. Because the dc switcher's maximum input voltage is 24V users must limit the voltage accordingly. 4.5V is the required supply voltage. An output current greater than 15A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. Its lowest voltage output is not less than 760mV.
TPS53129PW Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
TPS53129PW Applications
There are a lot of Texas Instruments TPS53129PW DC to DC converter applications.
- Analog precision reference circuits
- Packaging
- Wind power
- Special machining machine tools
- Grinders
- Post equipment
- Boring machines
- Gear/thread machining machines
- Injection molding machinery
- Shearing machines
