TPS53624RHAT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -10°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP+™, Eco-Mode™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53624 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 1.7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Quiescent Current | 4mA |
| Control Features | Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Frequency - Switching | 200kHz 300kHz 400kHz 500kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 500kHz |
| Clock Sync | No |
| Duty Cycle | 60 % |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53624RHAT Overview
In the 40-VFQFN Exposed Pad package, the switching controller meets most application requirements. It is sufficient to generate 2 outputs with this dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's3V~28V is the operating voltage and supply voltage of the dc control. Suitable for work in a -10°C~105°C TA dc switcher. This switching controller can switch at 200kHz 300kHz 400kHz 500kHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. A variety of 40 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 5V. Search for "TPS53624" to find other relevant dc to dc converter ics. 40 pins are present on switching converter. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 1.7V. The dc to dc regulator can only accept a maximum input voltage of 5.5V. In most cases, the dc dc regulator's output current is 50A. This information should be noted when you begin working with the component. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator's maximum frequency is 500kHz. Basically, it's a dc to dc voltage regulator from the D-CAP+?, Eco-Mode? series. The dc switching utilizes 4mA when it is in a dormant state.
TPS53624RHAT Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 400kHz 500kHz
Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control
PULSE WIDTH MODULATION
TPS53624RHAT Applications
There are a lot of Texas Instruments TPS53624RHAT DC to DC converter applications.
- Program control systems
- Experimental setup
- Scientific testing
- Hydro power
- Textile machinery
- ATMs
- Smoke prevention equipment
- Access control systems
- USB circuits
- Automation technology
