TPS61140DRCRG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PFM TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.5MHz |
| Pin Count | 10 |
| Max Output Current | 23mA |
| Input Voltage-Nom | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Max Supply Current | 2mA |
| Current - Output | 23mA |
| Quiescent Current | 125μA |
| Max Output Voltage | 27V |
| Voltage - Output | 27V |
| Topology | Boost |
| Min Input Voltage | 3V |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Number of Segments | 4 |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS61140DRCRG4 Overview
Frequency 1.5MHz is the basis of operation.The operation of this system is supported by 10 terminations.The configuration of the board is built around 10 pins.The number of segments is estimated to be 4.The voltage of 6V is acceptable.A voltage of 27V is produced by it.There are 10 pins on this device.Further, its characteristics allow it to be classified as Switching Regulator or Controllers.At a voltage of 3V, it operates at a minimal input voltage.It is designed to operate at a minimal voltage of 2.5V to achieve the highest efficiency.In terms of supply current, 6V is the maximum value.When the maximum supply current is less than 2mA, this device is able to provide high efficiency.A stable operating temperature of 85°C is required.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.When operating with a maximum output current of 23mA, it can deliver all the benefits of a LED driver.In the absence of external factors, there is 125μA consumption of current.There shouldn't be an increase in output voltage over 27V.When operating the device, 3.6V volts are assigned to the circuit.There is a current of 23mA can be supplied to the load.A voltage of 2.5V is maintained as the minimal voltage it outputs.Transmission is available on 2 channels.As a result, this LED driver has a PFM TECHNIQUE IS ALSO POSSIBLE characteristic.The analog IC used in this device is SWITCHING REGULATOR.
TPS61140DRCRG4 Features
Frequency of 1.5MHz
PFM TECHNIQUE IS ALSO POSSIBLE
TPS61140DRCRG4 Applications
There are a lot of Texas Instruments TPS61140DRCRG4 LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Amusement Machines
- Stage and Studio lighting
- Scanners and Handy Terminals
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- High-end retail lighting
- Panel lighting
- Linear fluorescent
- LED backlight driver for LCD displays for portable equipment
- LED Lighting PFCs, Linear Dimmable
