UC2524ADWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | UC2524 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 80V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 120ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 45% |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2524ADWG4 Overview
With its 16-SOIC (0.295, 7.50mm Width) package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 2 numbers. A solid enclosure of Tube surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. 8V~40V is the operating voltage and supply voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 500kHz . dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. 16 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 20V. Other relevant dc to dc converter ics will be returned if you search "UC2524". There are only 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 80V voltage. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Switching controller operates at 450kHz Hz. Input voltage can be set to 40V for nominal working status.
UC2524ADWG4 Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2524ADWG4 Applications
There are a lot of Texas Instruments UC2524ADWG4 DC to DC converter applications.
- Hydraulic presses
- Servo drive system
- Window air conditioners
- Product burn-in
- Serial communication converter
- Electric heating, lighting
- Large fire protection systems
- Analog precision reference circuits
- Electric water heaters
- Game consoles
