UC2825QTR
| Parameters | |
|---|---|
| Synchronous Rectifier | No |
| Duty Cycle (Max) | 80% |
| Output Phases | 1 |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | TIN |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.4V~30V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 8.8V |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 340kHz~460kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
UC2825QTR Overview
Capsuled in the 20-LCC (J-Lead) package, the switching controller can be used for a wide range of applications. 2 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 8.4V~30V volts and has 8.4V~30V supply voltage. A -40°C~85°C TA dc switcher is not a problem. There is a switch at 340kHz~460kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at QUAD . A variety of dc switching's functions can be performed on 20 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. It is recommended to use 8.8V as the minimum input voltage of dc dc voltage regulator. The dc to dc regulator is limited to 30V input voltage. DC to DC voltage regulator has the value of CAN ALSO BE CONFIGURED IN CURRENT MODE to better satisfy the requirement. As a result, switching converter outputs current to the greatest value possible (2A).
UC2825QTR Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC2825QTR Applications
There are a lot of Rochester Electronics, LLC UC2825QTR DC to DC converter applications.
- Handheld GPS
- Electrical power transmission
- Smart grid
- Injection molding machinery
- Low output voltage switching power supply circuits
- Lathes
- Correction machines
- Product burn-in
- Digital video recorders
- Product testing
