UC2843ADR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UC284*A |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.05V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.4V~30V |
| Quiescent Current | 500μA |
| Control Features | Frequency Control |
| Input Voltage (Min) | 8.2V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 96% |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UC2843ADR2 Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's8.4V~30V is the supply voltage and the operating voltage of the dc control. Suitable for working in an dc switcher that has a -25°C~85°C TA. In this switching controller, the switch can be set to Up to 500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. 14 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "UC284*A". 14 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 8.2V. DC regulator outputs 5.05V voltage according to the test statistics. Switching controllers work at 60kHz Hz. A circuit should contain 30V in order to ensure the voltage regulator dc to dc runs safely and reliably. 1A is the largest value switching converter outputs. A dc switching in a dormant state uses 500μA.
UC2843ADR2 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Frequency: 60kHz
UC2843ADR2 Applications
There are a lot of ON Semiconductor UC2843ADR2 DC to DC converter applications.
- Scientific testing
- Sensitive electronic devices
- USB circuits
- Telecommunications equipment
- Sink circuits
- Computer-related products
- SMT equipment
- Experimental setup
- Industrial controllers
- Network technology
