UC2843AQD8RQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.608178mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | UC2843 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 25V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2843AQD8RQ1 Overview
This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 7.6V~30V voltage are supplied and operated. Suitable for a -40°C~125°C TA dc switcher. The switching controller is capable of switching at the Up to 500kHz position. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. UC2843 can be used to locate other relevant dc to dc converter ics. 8 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 13.5V. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Switching controller operates at 500kHz Hz. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. 25V is the nominal working voltage.
UC2843AQD8RQ1 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz
UC2843AQD8RQ1 Applications
There are a lot of Texas Instruments UC2843AQD8RQ1 DC to DC converter applications.
- Constant current circuits
- Plate bending machines
- Hydro power
- Machining centers
- Scientific research
- USB circuits
- Printing equipment
- Sensitive electronic devices
- Various precision measuring instruments
- Drilling machines
