UC3842AN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-PDIP-T8 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 96% |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
UC3842AN Overview
Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 10V~30V voltage is supplied to the dc control and used for operating it. Suitable for work in a 0°C~70°C TA dc switcher. With this switching controller, you can switch at Up to 500kHz. It is suitable for general dc dc regulator when it is set to Through Hole. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. 8 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. It should be fully noted that the dc to dc regulator only accepts 25V input voltage at most. Current is output to the greatest value of 1A.
UC3842AN Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
UC3842AN Applications
There are a lot of Rochester Electronics, LLC UC3842AN DC to DC converter applications.
- Mobile phones
- Various precision measuring detectors
- Arc suppression circuits
- Computed tomography (CT)
- PSRR circuits
- Electrical power transmission
- Flexible manufacturing cells
- Remotely powered electric motors
- Serial communication converter
- Hydraulic presses
