UC3843BD
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UC384*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Quiescent Current | 12mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UC3843BD Overview
In the 14-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 7.6V~30V volts and has 7.6V~30V supply voltage. A 0°C~70°C TA dc switcher is not a problem. This switching controller can switch at Up to 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. 14 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. UC384*B can be searched for other relevant dc to dc converter ics. Pins number 14 of switching converter in total. In particular, switching converter belongs to the Switching Regulator or Controllers family. As determined by the test statistics, the output voltage of DC regulator is 5.1V. It should be fully noted that the dc to dc regulator only accepts 25V input voltage at most. If you start a project, note down the dc dc regulator's usual output current of 1A. Voltage regulator dc to dc is designed to operate at 96 % duty cycle during power-ups and power-downs to ensure reliability. Switching controllers operate at 60kHz frequencies. A circuit should contain 30V in order to ensure the voltage regulator dc to dc runs safely and reliably. During dormancy, the dc switching uses 12mA.
UC3843BD Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 60kHz
UC3843BD Applications
There are a lot of ON Semiconductor UC3843BD DC to DC converter applications.
- Photovoltaic power
- Game consoles
- Automatic plug-in machines
- Handheld GPS
- Boring machines
- Hydro power
- Smart grid
- Electrical power transmission
- Smoke prevention equipment
- Power supplies of electronic gadgets
